The Cyalume flare alternative SnapLight is a green industrial grade phthalate-free chemical light stick measuring 10" long, for providing instant 360 degree illumination, that can be seen up to a mile away for up to 2 hours in optimal conditions. It also has a reflective strip, and a wire stand for positioning at an angle for better visibility. To activate the light stick, bend, snap and shake the tube. The SnapLight is waterproof, non-toxic, non-flammable, and emits no heat. This SnapLight meets Department of Transportation (DOT) non-hazardous standards, requires no permit for storage, and has up to a two-year shelf life from date of manufacture.
The durable, waterproof, external body of the light stick is made from low density polyethylene (LDPE), and is phthalate free for safety. The internal illuminating chemical substance is non-toxic and non-flammable, and the components of the light stick are recyclable. This SnapLight floats in water and has a specially designed illuminating substance that performs in warm, cold, wet and dry environments.
All sticks are tested at a temperature of 72 degrees F (22 degrees C) to determine the illumination duration. Each 10-degree C (50-degree F) increase or decrease in temperature doubles or halves the reaction rate, and therefore the brightness and duration. For example, the same light stick that emits approximately 30 lux (a unit that describes how much light is visible over a square meter) at 15 minutes after activation at 24 degrees C (75 degrees F), will be half as bright but glow twice as long at 14 degrees C (57 degrees F). At 34 degrees C (93 degrees F), the same light stick would be twice as bright, but glow half as long. Storage at elevated temperatures (above 120 degrees F or 49 degrees C) will decrease shelf life and start to soften the plastic tube, and increase the risk of a leak. Exposure to cold temperatures will not affect the light sticks if they are warmed above 40 degrees F (4.5 degrees C) before activation, unless they are frozen (which occurs at -15 to -20 degrees F, or -26 to -29 degrees C). Once light sticks have been frozen, they will still produce some light, but performance will not be as reliable. Humidity and atmospheric conditions do not affect the light sticks.
Light sticks are chemiluminescent substances in plastic tubes that provide hours of illumination in a number of safety, industrial, and military applications. Light sticks are waterproof and non-flammable, and non-sparking, which makes them useful in hazardous situations where sparks or flame could cause an explosion. Duration is determined by the chemistry of the formulation. Brightness is affected by temperature: the warmer the temperature, the brighter the light will appear. All sticks are tested at a temperature of 72 degrees F to determine the illumination duration. Viewing distance can be affected by temperature, moisture, and other elements. Exposure to direct sunlight can reduce shelf life and effectiveness.
Cyalume Technologies manufactures chemiluminescent products used for safety, industrial, and military applications. The company, founded in 1970 and headquartered in West Springfield, MA, makes products under ChemLight and SnapLight brands. ChemLight products meet military specifications, and the company meets ISO 9001 standards.
What’s in the Box?
- 10 light sticks in a cardboard box
Cyalume Industrial Grade SnapLight Flare Alternative Chemical Light Sticks with Bipod Stand Green 10-Inch Long 2 Hour Duration (Pack of 10) - B004NNVHV6